Measuring for curved architraves starts with accurately recording your opening’s shape and clearly identifying where each piece belongs. Whether you’re renovating an existing archway or planning a new one, careful preparation helps communicate the details to your moulding manufacturer.
In our video, Jess and Nati demonstrate the process on site—from measuring and marking the walls to labelling templates and completing the paperwork.
What Is a Curved Architrave?
A curved architrave is a moulding that follows the curved edge of an opening. It frames the shape and creates a finished detail around arched doorways, windows and internal passageways.
Curved architraves can complement traditional homes with decorative profiles or contemporary interiors with simpler designs.
What Do I Need Before Measuring?
Have these items ready:
- 3 mm MDF sheets large enough to capture your openings.
- Measuring tape.
- Black marker for identifying walls and templates.
- Ladder for reaching higher areas safely.
Check your MDF sheet sizes before starting. In the video, the first sheet is too short for the opening—a useful reminder to bring the right size.
How to Measure Your Arched Opening
1. Measure from the Floor
Measure from the floor to the point where the curve will finish. Make a clear reference mark on the wall, then measure and mark the other side.
Check each opening individually, even when two archways look similar.
2. Position Your MDF Template
Hold the MDF sheet against the opening using your reference marks. Follow the video demonstration to record the curve, measuring and marking both sides.
Take time to check the template against the opening before moving on.
3. Label the Wall and Matching Template
Give each opening and its corresponding template a clear identification label. In the video, the team uses 1A, 1B, 2A and 2B.
Keep these references consistent across the walls, templates and paperwork. This helps AMDC identify each curve during manufacturing and label the finished mouldings for delivery to the correct location.
4. Complete the Paperwork
Complete your curve form while you’re still on site so you can check the details against each opening.
Record the matching template references and clearly indicate your profile direction and quirk selection.
Check Your Profile Direction and Quirk
The form asks you to select an inward or outward profile. Watch the video examples to understand the difference and confirm the direction you want.
The video also compares 0 mm, 5 mm and 10 mm quirk examples for both profile directions. Use these visuals when completing your form, and ask the AMDC team if you’re unsure which option suits your project.
Do I Need a Template for Every Curve?
An opening that follows a circular arc may be assessed using its opening width and curve height, allowing AMDC to calculate the radius.
Before You Finish
Check that:
- Both sides of each opening have been measured.
- Every template is clearly labelled.
- Wall, template and paperwork references match.
- Your profile direction and quirk selections are recorded.
Watch Jess and Nati’s video for the on-site walkthrough.
Need Help with Curved Architraves?
Contact the Australian Moulding & Door Company team to discuss your opening, profile options and template requirements before placing your order.
Discuss Your Project